Automotive Tester | Automotive Test Equipment Manufacturers https://ots-testequipment.net/automotive-test-equipment/ Mon, 08 Dec 2025 07:30:08 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://ots-testequipment.net/wp-content/uploads/2023/11/cropped-site-icon-32x32.webp Automotive Tester | Automotive Test Equipment Manufacturers https://ots-testequipment.net/automotive-test-equipment/ 32 32 Automotive Drive-in Environmental Chamber https://ots-testequipment.net/product/walk-in-temperature-humidity-test-chamber/ Mon, 13 Mar 2023 07:18:22 +0000 https://ots.seowaimao.com/?post_type=product&p=1250 The walk-in environmental test chamber has a control panel, electrical panel, humidity panel blower, heater, humidifier, and freezer. It provides a sizeable spare part for temperature and humidity testing of large parts, semi-finished and finished products. This depends on testing large or more numerous products. Such as computer terminals and vehicle parts.

The post Automotive Drive-in Environmental Chamber appeared first on OTS TECHNIK.

]]>

Product Specification

Operation model Program or fix point running
  Memory capacity 120 programs,1200steps, all repeat 999 cycles, part repeat 99 cycles
Controller Accuracy Temp.:0.1% of F.S±1 digit  Humidity:0.1% of F.S±1 digit
  Input Temp.:pt-100, Humidity:pt-100 or ~5V DCV
  Comm. port RS-232 or USB (Software is an option)
Temp. range Maximum:80 ºC,150 ºC;Minimum:-60 ºC,-50 ºC,-40 ºC,-30 ºC,-20 ºC,-10 ºC,0 ºC
Humidity Range 10%~98%
Temp. constancy ±0.5 ºC
Humidity constancy ±2.5%R.H
Temp. uniformity ±2.0 ºC
Humidity uniformity ±5.0%R.H
Ambient Temp. +5 ºC~+35 ºC
Wiring method AC 380±10% 50Hz ,3 phase 4 wires +Ground Wires
Heat time +20 ºC~+80 ºC,Within 60 min
Pull down time +20 ºC~-55 ºC, -40 ºC,-20 ºC,-10 ºC,Within 120 or 90 or 60  min
Note:1. We reserve the right to change specifications without prior notice   2. Customized sizes and configurations are available

Walk-In Environmental Test Chamber Features

  1. Realize temperature constant value control and program control.
  2. The entire data recorder function (optional) is for recording and retrospect. Protect/heater for short circuit protection, ensuring the stability of air volume and heating during the operation.
  3. The temperature and humidity testing chamber has a USB connector and a WAN communication function. It can make the communication equipment and software extensions meet customers’ needs.
  4. Adopt an internationally famous refrigeration control mode. So, it can automatically adjust the compressor refrigeration power of 0% ~ 100%. Compared with the traditional thermal equilibrium temperature control mode, The energy consumption is reduced by 30%.
  5. Refrigeration and electric control are vital to adopting an internationally famous brand. It makes the whole of the equipment has improved the quality and guarantee.
  6. Customize size/customize indicators/customize various optional features.

Walk-In Environmental Chamber Applications

  • Large-scale parts
  • Computer terminals
  • Vehicle
  • Battery
  • Vehicles
  • Aerospace
  • Metal Parts
  • Electronics
  • Plastic and Rubber

The post Automotive Drive-in Environmental Chamber appeared first on OTS TECHNIK.

]]> Large Dust Proof Test Chamber https://ots-testequipment.net/product/dust-test-chamber-duplicate-1/ Thu, 08 Jun 2023 02:34:48 +0000 https://ots-testequipment.net/?post_type=product&p=3276 The dust test chamber is designed according to GB4706, GB2423, GB7000.1, IEC60529, and other standards. This dust test chamber can meet the requirements of the IPX5 and IPX6 dust tests. It is mainly used to detect shells of control cabinets, household appliances, low-voltage electrical appliances, automobiles, lamps, motorcycle parts, and so on. The pressure of the test chamber can be changed constantly. It is suitable for indoor low-concentration dust pollution tests to check the degree of sealing and corrosion of samples in this environment.

The post Large Dust Proof Test Chamber appeared first on OTS TECHNIK.

]]>

Product Specification

STRUCTURAL PARAMETERS
Inner chamber size 3000*3000*2000mm(W*D*H)
Outer chamber size 3800*3250*2650mm(W*D*H)
Negative pressure gauge Equipped with negative pressure gauge and manual control valve, which can be manually adjusted to -2kpa.
Screen specifications Nominal spacing; ≤ 75um, nominal wire diameter 50µm (external)
Dust consumption The dry talc powder can pass through square holes with a sieve of 75um and a wire diameter of 50um.
Amount of dust blown 2～4kg／m3（Cycle dust）
Air velocity ≤ 2 m/s
Powder spraying and dust reduction method Free fall
Dust blowing time 1S-999H （Adjustable）
Vibration time 1S-999H（Adjustable）
Dust dehumidification Electric heating dehumidification
Blowing cycle Continuous and periodic blowing dust can be set at any time.
Electrical parameters
Equipment power 380V
equipment power 15KW

Dust Test Chamber Features

  1. The dust test chamber formed using a CNC machining box has an excellent shape, does not react with the handle, and is easy to operate.
  2. Imported high-grade stainless steel inner tank (SUS304) mirror panels, use A3 steel box outside the gall spray. So, it can increase the appearance of the texture and cleanliness.
  3. Equipment containing vertical dust circulation air dust can be reused for testing. The device itself has a good sealing performance. And the test laboratory can observe the situation. The device is equipped with a vacuum system to meet the needs of the test. Equipment dust at the bottom of the device can be replaced,
  4. Large observation window with bright lights to keep the box. And the use of tempered glass embedded heating element, at any time, a clear observation box condition.
  5. This dust chamber is externally connected to test power lines or signal lines. The test was carried out with a 50mm diameter hole.

Dust Test Chamber Applications

  • Led lights
  • Metal Parts
  • Electronics
  • Car Spare Parts
  • Battery Pack

The post Large Dust Proof Test Chamber appeared first on OTS TECHNIK.

]]> Automotive Salt Fog Chamber https://ots-testequipment.net/product/temp-humidity-and-salt-spray-combined-test-chamber/ Mon, 13 Mar 2023 07:25:04 +0000 https://ots.seowaimao.com/?post_type=product&p=1258 A composite salt fog chamber is suitable for surface treatment of various materials with temperature and humidity salt spray. Such as coating, electroplating, inorganic and organic film leather, harmful anti-rust oil coating, and other anti-corrosion treatments. This is used to test corrosion resistance. The salt spray chamber can also protect exterior lighting, signaling devices, and vehicle lamp housings.

The post Automotive Salt Fog Chamber appeared first on OTS TECHNIK.

]]>

Product Specification

MODEL XB-OTS-90 XB-OTS-120 XB-OTS-160 XB-OTS-200
Interior Test Chamber
Dimension(cm)(L×W×H)		 90×50×60 120×80×50 160×100×50 200×100×50
Exterior Test Chamber Dimension(cm)(L×W×H) 141*145*140 190*165*140 200*190*140 240*200*140
Capacity of the chamber(L) 270L 480L 800L 1000L
Temperature&humidity of the operating environment +5°C~ +35°C / <85%RH
Air pressure 86~ 106Kpa
Lab. temperature NSS ACSS           35°C±1°C
CASS              50°C±1°C
Pressure barrel temperature NSS ACSS           47°C±1°C
CASS                63°C±1°C
Temperature&humidity
Control Accuracy		 Test room temperature range: +0℃～+85℃ Relative humidity: 20%～98%RH(±3%)
Saturated barrel temperature: 47℃～70℃ Temperature/humidity  uniformity: ≤±2℃  ≤±3%
Temperature resolution: 0.01 ℃ Humidity Resolution: 0.1% RH
Temperature fluctuation: ± 0.5 ℃ Humidity fluctuation: ± 2% RH

Salt Fog Test Chamber Features

  1. The automatic/manual water system automatically adds the water level. If the water level is low, the test is not interrupted. The water level is an insufficient warning to ensure the use of safety.
  2. Precision glass nozzle (PYREX) made of special glass, mist spread evenly and naturally falls on the specimen. The salt spray test equipment can be used continuously for 4000 hours to ensure no crystallization salt blockage.
  3. Inlet temperature controller using a digital display, PID control, error of ± 0.1 ° C.
  4. The salt spray chamber uses direct steam heating, heating up fast and reducing standby time. Heating tubes have highly corrosion-resistant titanium tubing.
  5. Laboratory basket rack using a plane indexing rack can arbitrarily adjust the angle. Four off the fog, and the direction is completely consistent.

Salt Fog Test Chamber Applications

  • Metal Parts
  • Electronics
  • Car Spare Parts
  • Building Materials
  • Automotive parts
  • Aviation equipment
  • Photographic equipment

The post Automotive Salt Fog Chamber appeared first on OTS TECHNIK.

]]> Automotive Thermal Chamber https://ots-testequipment.net/product/three-box-type-thermal-shock-test-chamber/ Mon, 13 Mar 2023 06:48:39 +0000 https://ots.seowaimao.com/?post_type=product&p=1225 The thermal test chamber is used to test the endurance of materials in the shortest time in a continuous environment of extremely high temperature and low temperature. This way, its thermal expansion and contraction caused by chemical changes can be tested. The thermal shock test chamber’s applicable object materials include metal, plastic, rubber, and electronics. A high-quality thermal shock test chamber can be a reference for product improvement.

The post Automotive Thermal Chamber appeared first on OTS TECHNIK.

]]>

Product Specification

MODEL XB-OTS-50 XB-OTS-80 XB-OTS-150 XB-OTS-225 XB-OTS-408
Internal size WxHxD(cm) 36×40×35 40×50×40 50×60×50 60×75×50 80×85×60
External size WxHxD(cm) 148x175x160 150X175X165 155x185X165 165x200X175 185x210x185
Shock Temperature ragne -65°C~150°C
Heating up time RT~200°C about 35min
Cooling down time RT~-70°C about 90min
Temp recover time/change time  ≤ 5min
Temp control accuracy ±0.5°C / ±2.0°C

Thermal Test Chamber Features

  1. The equipment area is divided into three areas: high and low temperatures. The test area has three parts. The test products are placed in the test area. High-temperature zone or low-temperature impact area in the test area impacts test products for Static.

  2. The thermal shock test chamber uses a touch graphic control interface. It is easy to operate, stable, and safe.

  3. The way of impact: Application of air duct switching temperature into the test area, do the thermal shock impact test.

two-boxes-Thermal-Test-Chamber-Feature

Thermal Testing Machine Applications

  • Mobile Phone & PC

  • Metal

  • Plastics

  • Rubber

  • Electronics

The post Automotive Thermal Chamber appeared first on OTS TECHNIK.

]]> Automotive Vibration Chamber https://ots-testequipment.net/product/temp-humidity-vibration-combined-chamber/ Mon, 13 Mar 2023 07:15:34 +0000 https://ots.seowaimao.com/?post_type=product&p=1246 The combined environmental test equipment provides a temperature and humidity change environment. It can be for scientific research and production units. Such as aerospace, aviation, petroleum, chemical, electronics, and communications. At the same time, the electrical vibration stress test is carried out in the laboratory according to the regulations. It can conduct temperature, humidity, and vibration stress screening tests on machines, electrical appliances, instruments, and materials. Such experiments are used to assess product suitability or behavioral evaluation.

The post Automotive Vibration Chamber appeared first on OTS TECHNIK.

]]>

Product Specification

MODEL XB-OTS-225F XB-OTS-408F XB-OTS-800F XB-OTS-1000F
Internal Dim.W×H×D(mm) 600*750*500 800*850*600 1000*100*800 1000*1000*1000
External Dim.W×H×D(mm) 900×1830×1560 1000×1930×1660 1100×2030×1860 1100×2030×2060
Temp. Range -70°C~+100°C(150°C)（A:-20°C；B：-40°C；C：-60°C；D：-70°C）
Humi. Range 20%~98%R.H.(10%-98%R.H/5%~98%R.H is a special optional condition)
Accuracy/Uniformity of temp humidity ±0.1°C；±0.1%R.H./2.0°C；±3.0%R.H.
Frequency Range 3~2000Hz
Max.Displacement 25mm
Rated Force 200kgf
Controller 1P PROGRAM COXTROL+SINE WAVE CONTROL SYSTEM

Vibration Test Chamber Features

  1. Multifunctional – can be used as a single temp and humidity chamber to maximize your return on investment.
  2. The viewing window is larger than the previous model to ease specimen inspection during the test. A heater inside the door prevents dew appearance.
  3. Rail to move the chamber back and forth, coupling shaft diameter selection.
  4. A heater inside the door prevents a dew appearance.
  5. Simulation test environment with three environmental factors in the same cabinet.
  6. Receive customized design and satisfy the strict user demand conditions.
  7. High performance and fast temperature change rate can be accelerated stress testing products.

Automotive Vibration Chamber Applications

  • Battery
  • Vehicles
  • Chemical
  • Aerospace
  • Metal Parts
  • Electronics
  • Car Spare Parts
  • Building Materials
  • Communication Equipment
  • Plastic Rubber Products

The post Automotive Vibration Chamber appeared first on OTS TECHNIK.

]]> Climate Vehicle Chamber https://ots-testequipment.net/product/temperature-humidity-chamber/ Mon, 13 Mar 2023 06:45:26 +0000 https://ots.seowaimao.com/?post_type=product&p=1219 The climate vehicle chamber can test material heat, cold, dry resistance, and humidity resistance. It is suitable for electronics, electrical appliances, communications, instrumentation, vehicles, plastic, metal, food, chemical, building materials, medical, aerospace, and other products.

The post Climate Vehicle Chamber appeared first on OTS TECHNIK.

]]>

Product Specification

MODEL XB-OTS-80 XB-OTS-150 XB-OTS-225 XB-OTS-408 XB-OTS-800 XB-OTS-1000
Inner Chamber Size W*H*D(cm) 40*50*40 50*60*50 60*75*50 80*85*60 100*100*80 100*100*100
External Chamber Size W*H*D(cm) 90*142*100 100*152*113 110*167*113 130*177*123 150*192*144 150*192*163
Inner Chamber Volume(L) 80 150 225 408 800 1000
Temperature Range -70°C~+150°C（180°C
(A：-20℃ B：-40℃ C：-60°℃ D：-70℃) (Optional)
Humidity Range 20%~98%R.H.(10%~98%R.H/ 5%~98%R.H)

Climate Vehicle Chamber Features

  1. This temperature and humidity chamber has a USB download function with an RS232 interface. The curve of the software does not need a recorder.
  2. The temperature and humidity test chamber has a vacuum glass observation window, direct observation of the function more effectively.
  3. The refrigerant servo control valve flow calculation. Save electricity by 30%, dormancy in flow time, and save more than 50% energy.
  4. Preventing electromagnetic interference by SGS certification controller. At least 32 digital soft paths match with The Times development and software upgrade function.
  5. Defrost cycle (800 cycles defrost time, defrosting guarantee within 2 hours each time, integration test reach 25% of the energy saving province electricity)

Climate Vehicle Chamber Applications

  • Battery
  • Vehicles
  • Chemical
  • Aerospace
  • Metal Parts
  • Electronics
  • Car Spare Parts
  • Building Materials
  • Communication Equipment
  • Plastic Rubber Products

The post Climate Vehicle Chamber appeared first on OTS TECHNIK.

]]> Ice Water Splash Tester https://ots-testequipment.net/product/ice-water-splash-tester/ Thu, 08 Jun 2023 02:00:24 +0000 https://ots-testequipment.net/?post_type=product&p=3273 The Ice Water Splash Tester can perform ice-water splash tests and simulate thermal-shock environments. This equipment is mainly used to simulate the real-world conditions of ice water splashing onto the surfaces of heating systems or critical components while a vehicle is driving on a wet, slippery road in winter. The failure modes are mechanical cracking of the material or seal failure due to differences in thermal expansion coefficients. This equipment is suitable for testing the cold resistance, heat resistance, and ice-water splash resistance of various raw materials and equipment used in electronics, electrical appliances, plastics, and other industries, as well as for quality control engineering.

The post Ice Water Splash Tester appeared first on OTS TECHNIK.

]]>

Product Specification

Inner size (WHD) 1000*`1000*1000mm
External size (WHD) 1500*1900*2250mm
Nozzle hole 1 slot nozzle
The nozzle position Left on the chamber
Distance between nozzle and sample 325±25mm (manual adjustment)
Temperature range RT+10℃～150℃
Heating rate RT+10℃～150℃≤45min
Temperature control range 0～+4 ℃
Cooling rate 25℃～2℃≤60min
Water jet flow 3～4 L/3S
Test liquid medium Deionized water or +3% Arizona fine dust
Splash time per cycle (30min) 3S, interval time: interval time: 29M57s (touch screen setting)
Cycle 100 times
Max load 210KG
Safeguard Leakage protection, water shortage protection, short circuit protection, phase sequence protection, thermal overload protection

Standard

GB/T 28046.4-2011 (ISO 16750-4:2006): Environmental Conditions and Tests for Electrical and Electronic Equipment of Road Vehicles Part 4: Climatic Load, VW80000: 2009-10 LV124 Test Items, Test Conditions and Test Requirements for Electrical and Electronic Components of Vehicles Less than 3.5 Tons.

Features of OTS Technik Ice Water Splash Tester

1. It applies to the ice water splash resistance test of the product

2. The shell is formed by a domestic high-quality steel plate CNC machine tool, and the surface is sprayed with baking paint, which is beautiful and durable.

3. The inner box is made of SUS304 # stainless steel plate to ensure no rust after long use.

4. Thermal insulation material: high-density glass fiber cotton, to ensure thermal insulation performance, maintain a balanced and stable indoor temperature.

5. A transparent observation window (multi-layer hollow tempered glass) is installed on the door, and an LED lighting lamp is installed on the door to facilitate observation of internal test conditions

6. The mixing system adopts a long shaft fan motor and a 304 stainless steel multi-wing impeller with high and low temperature resistance to achieve vertical diffusion circulation of intensive convection, to make the temperature in the laboratory uniform and stable.

7. A double-layer high-tension sealing strip with high temperature resistance is used between the door and the box of the equipment to ensure the tightness of the test area. The inner plate of the gate is made of 304 stainless steel, and the non-reacting door handle is used to make the operation easier.

8. The test hole (100mm in diameter) is installed on the left side of the equipment, which can be externally connected to the test power line or signal line;

9. The equipment control part is designed on the right side of the equipment, with a control touch screen, a control switch, etc., which is easy to operate and maintain.

10. High-quality fixed PU movable Korean casters are installed at the bottom of the machine, which can easily move the machine to the designated position, and finally fix the casters.

11. The control system uses a 7-inch touch screen+Panasonic PLC. The electrical components are imported brands such as LS, Omron, etc. The wiring process meets the requirements of national standards. The electrical board layout is reasonable, the wiring is firm, and the markings are clear.

12. The 7-inch LCD touch screen control+PLC control can respectively control the temperature in the box, the temperature of the water tank, the flow, the water pump, and the test time; The flow and temperature are displayed directly on the touch screen, with automatic constant current and constant temperature.

13. The refrigeration system of the equipment is installed at the bottom. The compressor is made of the Taikang brand imported from France to ensure the refrigeration effect and reliability. The tubular heat exchanger is made of 316 stainless steel to prevent corrosion from saltwater.

14. The refrigeration system adopts a totally enclosed French Taikang compressor, the condensation mode is air cooling, and R404R environment-friendly refrigerant is used. The entire system pipeline has passed a 48-hour pressure-leak detection test, confirming that the refrigeration system can operate stably for a long time.

Ice Water Splash Tester Applications

Ice Water Splash Tester can simulate the ice water splashing on the heating system or components when driving on wet roads in winter. It is a reliability test equipment for all kinds of electronic, electrical, plastic, and other raw materials and devices. It can carry out cold resistance, heat resistance, ice water splash resistance tests, and quality control engineering.

The post Ice Water Splash Tester appeared first on OTS TECHNIK.

]]>