Product Specification
| Inner size (WHD) | 1000*`1000*1000mm |
| External size (WHD) | 1500*1900*2250mm |
| Nozzle hole | 1 slot nozzle |
| The nozzle position | Left on the chamber |
| Distance between nozzle and sample | 325±25mm (manual adjustment) |
| Temperature range | RT+10℃～150℃ |
| Heating rate | RT+10℃～150℃≤45min |
| Temperature control range | 0～+4 ℃ |
| Cooling rate | 25℃～2℃≤60min |
| Water jet flow | 3～4 L/3S |
| Test liquid medium | Deionized water or +3% Arizona fine dust |
| Splash time per cycle (30min) | 3S, interval time: interval time: 29M57s (touch screen setting) |
| Cycle | 100 times |
| Max load | 210KG |
| Safeguard | Leakage protection, water shortage protection, short circuit protection, phase sequence protection, thermal overload protection |
Standard
GB/T 28046.4-2011 (ISO 16750-4:2006): Environmental Conditions and Tests for Electrical and Electronic Equipment of Road Vehicles Part 4: Climatic Load, VW80000: 2009-10 LV124 Test Items, Test Conditions and Test Requirements for Electrical and Electronic Components of Vehicles Less than 3.5 Tons.
Features of OTS Technik Ice Water Splash Tester
1. It applies to the ice water splash resistance test of the product
2. The shell is formed by a domestic high-quality steel plate CNC machine tool, and the surface is sprayed with baking paint, which is beautiful and durable.
3. The inner box is made of SUS304 # stainless steel plate to ensure no rust after long use.
4. Thermal insulation material: high-density glass fiber cotton, to ensure thermal insulation performance, maintain a balanced and stable indoor temperature.
5. A transparent observation window (multi-layer hollow tempered glass) is installed on the door, and an LED lighting lamp is installed on the door to facilitate observation of internal test conditions
6. The mixing system adopts a long shaft fan motor and a 304 stainless steel multi-wing impeller with high and low temperature resistance to achieve vertical diffusion circulation of intensive convection, to make the temperature in the laboratory uniform and stable.
7. A double-layer high-tension sealing strip with high temperature resistance is used between the door and the box of the equipment to ensure the tightness of the test area. The inner plate of the gate is made of 304 stainless steel, and the non-reacting door handle is used to make the operation easier.
8. The test hole (100mm in diameter) is installed on the left side of the equipment, which can be externally connected to the test power line or signal line;
9. The equipment control part is designed on the right side of the equipment, with a control touch screen, a control switch, etc., which is easy to operate and maintain.
10. High-quality fixed PU movable Korean casters are installed at the bottom of the machine, which can easily move the machine to the designated position, and finally fix the casters.
11. The control system uses a 7-inch touch screen+Panasonic PLC. The electrical components are imported brands such as LS, Omron, etc. The wiring process meets the requirements of national standards. The electrical board layout is reasonable, the wiring is firm, and the markings are clear.
12. The 7-inch LCD touch screen control+PLC control can respectively control the temperature in the box, the temperature of the water tank, the flow, the water pump, and the test time; The flow and temperature are displayed directly on the touch screen, with automatic constant current and constant temperature.
13. The refrigeration system of the equipment is installed at the bottom. The compressor is made of the Taikang brand imported from France to ensure the refrigeration effect and reliability. The tubular heat exchanger is made of 316 stainless steel to prevent corrosion from saltwater.
14. The refrigeration system adopts a totally enclosed French Taikang compressor, the condensation mode is air cooling, and R404R environment-friendly refrigerant is used. The entire system pipeline has passed a 48-hour pressure-leak detection test, confirming that the refrigeration system can operate stably for a long time.
Ice Water Splash Tester Applications
Ice Water Splash Tester can simulate the ice water splashing on the heating system or components when driving on wet roads in winter. It is a reliability test equipment for all kinds of electronic, electrical, plastic, and other raw materials and devices. It can carry out cold resistance, heat resistance, ice water splash resistance tests, and quality control engineering.
