Abrasion Testing Machine | Abrasive Test Equipment Manufacturer https://ots-testequipment.net/abrasion-testing-machine/ Tue, 01 Apr 2025 08:05:36 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://ots-testequipment.net/wp-content/uploads/2023/11/cropped-site-icon-32x32.webp Abrasion Testing Machine | Abrasive Test Equipment Manufacturer https://ots-testequipment.net/abrasion-testing-machine/ 32 32 Ribbon Webbing Abrasion Tester https://ots-testequipment.net/product/ribbon-webbing-abrasion-tester/ Tue, 03 Sep 2024 09:23:04 +0000 https://ots-testequipment.net/?post_type=product&p=4962 The Ribbon Webbing Abrasion Test Machine is used to test the wear resistance of various webbings and safety belts.

Working principle: The webbing is rubbed back and forth on the two corners of the hexagonal bar to observe the degree of wear and tear and determine the quality of the product.

The post Ribbon Webbing Abrasion Tester appeared first on OTS TECHNIK.

]]>

Testing standards

ASTM D6770, Federal Test Method STD No 191Am Method 5309

Ribbon Webbing Abrasion Tester Specification

1. Load: 2.3±0.05 kg
2. Roller: ￠400 mm
3. Drive mode: motor drive
4. Test fixture: 3 sets (according to the size of the webbing)
5. Friction Angle: 85±2°
6. Test stroke: 300±20 mm
7. Test speed: 30±2 times /min
8. Counting mode: touchscreen control
9. Hex bar: 6.35± 0.03mm, chamfer 0.5± 0.1mm
10. Machine size: 105*105*90cm
11. Weight: 198 kg
12. Power supply: AC220V, 60Hz, 800W, 4A

Detailed introduction of Ribbon Webbing Abrasion Test machine

Ribbon-Webbing-Abrasion-Tester-test-screen

1. PV: Displays the current test times in real-time

2. SV: Determine the number of tests

3. Speed: Displays the current test speed

4. Start-up, stop/reset: Start/stop the test

5. Check: The page for viewing groups is displayed

Ribbon-Webbing-Abrasion-Test-machine-screen
  • Stop/Reset: The number of arrival stop mode/sample break stop modes can be selected.
  • Clear All to zero: Clears three groups of count times.
Ribbon-Webbing-Abrasion-Tester-settings
  • Entering setting

Operation Instruction of Ribbon Webbing Abrasion Testing machine

1. Place the machine in a horizontal position.

2. Connect the power cable and turn on the power switch.

3. Set the required test parameters (frequency, speed)

4. Clamp the product to be tested

5. Press the test button to start the test

6. Automatically stop after reaching the set condition value

7. Take out the specimen and check the degree of damage to the test sample.

Maintenance of Ribbon Webbing Abrasion Test equipment

1. Pay attention to each key; gently press and release.

2. When the machine is working, the power should be grounded with three plugs and cut off when it is not working.

3. We should place the machine in the laboratory, and keep the ground dry and smooth.

The post Ribbon Webbing Abrasion Tester appeared first on OTS TECHNIK.

]]> Multifunctional wear-resistant testing machine https://ots-testequipment.net/product/din-abrasion-tester-duplicate-1/ Mon, 25 Dec 2023 03:39:20 +0000 https://ots-testequipment.net/?post_type=product&p=4529 Rubber Shoes DIN Abrasion Resistance Tester tests the friction of the surface by a particular piece of sandpaper. After friction for a specific time, and then assesses the condition of the material surface, weight, volume, and thickness. This standard assesses the abrasive nature of materials.

The post Multifunctional wear-resistant testing machine appeared first on OTS TECHNIK.

]]>

Product Specification

Model Rubber Shoes DIN Abrasion Resistance Tester
Specimen Size dia 16mm, thickness at least 6mm
Specimen Load 10N± 0.2N
Diameter of wear wheel dia 150mm
Speed of wear wheel 40 ±1RPM
Emery cloth Specification 60 #, seam is less than 2mm
Testing Length 40M (about 84 rotate)
Horizontal displacement 4.2mm / rotate

DIN Abrasion Tester Applications

  • Shoes
  • Clothing
  • Luggage
  • Handbag

The post Multifunctional wear-resistant testing machine appeared first on OTS TECHNIK.

]]> DIN Abrasion Tester https://ots-testequipment.net/product/din-abrasion-tester/ Mon, 13 Mar 2023 03:43:49 +0000 https://ots.seowaimao.com/?post_type=product&p=1031 Rubber Shoes DIN Abrasion Resistance Tester tests the friction of the surface by a particular piece of sandpaper. After friction for a specific time, and then assesses the condition of the material surface, weight, volume, and thickness. This standard assesses the abrasive nature of materials.

The post DIN Abrasion Tester appeared first on OTS TECHNIK.

]]>

Product Specification

Model Rubber Shoes DIN Abrasion Resistance Tester
Specimen Size dia 16mm, thickness at least 6mm
Specimen Load 10N± 0.2N
Diameter of wear wheel dia 150mm
Speed of wear wheel 40 ±1RPM
Emery cloth Specification 60 #, seam is less than 2mm
Testing Length 40M (about 84 rotate)
Horizontal displacement 4.2mm / rotate

DIN Abrasion Tester Applications

  • Shoes
  • Clothing
  • Luggage
  • Handbag

The post DIN Abrasion Tester appeared first on OTS TECHNIK.

]]> Coating Anti-slip Testing Machine https://ots-testequipment.net/product/coating-anti-slip-testing-machine/ Mon, 13 Mar 2023 03:43:46 +0000 https://ots.seowaimao.com/?post_type=product&p=1083
The coating anti-slip testing machine is a dynamic pendulum impact instrument. It is based on the potential energy loss of the pendulum being equal to the rubber sheet installed at the end of the pendulum arm sliding over the road to overcome the road friction.

The post Coating Anti-slip Testing Machine appeared first on OTS TECHNIK.

]]>

Product Specification

Standard:
BS7976
Pendulum weight:
1500±30g; Pendulum moment of gravity: 410±5mm
Positive static pressure of rubber sheet against road surface:
2263g
The number of times when the swing head is free to drop at 5° tilt until the swing stops, not less than 70 times
Distance between the outer edge of the rubber sheet and the swing center:
510mm
The total weight of the instrument:
24Kg
Swing value range: generous plate 0-150BPN:
Small dial 0-1.0 (rough aggregate grinding value test)

Coating Anti-slip Test Machine Applications

  • Friction

The post Coating Anti-slip Testing Machine appeared first on OTS TECHNIK.

]]> Floor Caster Testing Machine https://ots-testequipment.net/product/floor-caster-testing-machine/ Mon, 13 Mar 2023 05:24:29 +0000 https://ots.seowaimao.com/?post_type=product&p=1127 Caster-resistant floor friction tester, also known as floor casters abrasion durability testing machine, floor casters friction durability testing machine, also known as castor-resistant floor effect tester, etc. This test is widely used to test the wear resistance of the castor floor. It consists of a castor with a certain specification at a certain speed and under a certain load, rubbing the track of the castor floor sample under certain circumstances. After the completion of the test, the cumulative number of automatic stops. Observe the change in the sample. Sample wear evaluation, with the function of setting the total number of laps of the experimental loop time, pressure holding time can be set.

The post Floor Caster Testing Machine appeared first on OTS TECHNIK.

]]>

Testing Standard of Floor Caster Tester

  1. BS EN 425-2002 (R2012): Resilient and Laminate Floor Coverings – Castor Chair Test Resilient floor coverings – Determination of chair casters effects.
  2. BS EN 985-2001 Textile floor coverings -. Castor chair test textile floor casters wheelchair test.
  3. ISO 4918-2009 Resilient, textile, and laminate floor coverings – Castor chair test stratified elastic textile floor coverings – foot wheelchair test.
  4. ISO 10581-2011 Resilient floor coverings – Homogeneous poly (vinyl chloride) floor covering – Specification Elastic Carpet – Homogeneous PVC carpet – Specification.
  5. ANSI-NALFA-LF-01-2008.3.6 / ANSI-NALFA-LF-01-2011 Castor Chair Resistance– North American Laminate Flooring Association chair casters anti-abrasion test.

Floor Caster Testing Machine Specification

Model XB-OTS-7W
Test function Caster-resistant flooring effect test / resistant floor caster friction durability test
Sample table ￠800mm
Size of Sample ￠750mm
Load 90kg
Test Speed Rotary table (20 + 0 / -1) r / min, caster assembly (50 ± 1) r / min
Timer (0 ~ 999999) times ( the standard of 25,000 times can be set)
Run Time Control  After the rotation of the (180 ± 10) s, and maintaining the platform stops (5 ± 2) s
Test Method Continuous cycle test
Power Supply 1 phase 220 V 50hz
External size About（L）1460×（D）1000×(H)1750mm
Weight About400kg
 

Accessories

 

 One set of standard load
One set of floor casters
One set of Power lines, operation manual
 
 

Floor Caster Test Machine Features

1. Mold custom casters particular abrasion test. Life is not less than 50 million times. Users can save the cost of a vast supply consumption. (Service life not less than 50 million times based on the results of Armstrong commercial flooring samples tested).

 
Custom-caster-wear-test
 

2. The configuration of the strengthening caster makes the caster structure more robust and durable. The floor caster testing machine is more suitable for testing the sample with greater friction and friction coefficient.

3. The caster has an automatic load-leveling device. It is possible that the specimen thickness changes automatically by adjusting three wheels in contact with the flatness of the sample.

4. After the proven standard running track friction, ensure the test conditions align with a unified industry standard. Standardization makes the results comparable.

 
The-requirement-of-wheel-tracks-in-standards
The-actual-wheel-tracks-during-testing-of-the-machine
 

5. The compact and elegant design is safer and easier to operate and maintain.

6. Having a function of one button to complete. It is one engineer who, without any mechanical principle, can quickly grasp and use practices safely.

 

The post Floor Caster Testing Machine appeared first on OTS TECHNIK.

]]> Floor Furniture Leg Abrasion Test Machine https://ots-testequipment.net/product/floor-furniture-leg-abrasion-test-machine/ Mon, 13 Mar 2023 03:46:01 +0000 https://ots.seowaimao.com/?post_type=product&p=1090

This abrasive testing machine is suitable for semi-rigid PVC plastic floor tiles, PVC sheet flooring, plastic flooring, floor, athletic floor, electrostatic floor, floor, carpet, and elastic fabric laminate flooring surfaces simulation anti-scratch test mobile furniture leg wear.

This European Standard specifies a method for determining the resistance of an installed resilient floor covering to the mechanical stress resulting from the simulated movement of a furniture leg.

The post Floor Furniture Leg Abrasion Test Machine appeared first on OTS TECHNIK.

]]>

Testing Standard of Floor Furniture Leg Abrasion Tester

  1. Reference standards:
    EN424：2002 Resilient floor coverings —Determination of the effect of simulated movement of a furniture leg.
  2. Weight load: 32kg, 70kg, 100kg.
  3. PLC control and online display of speed and test force value.
  4. Test speed: 150 mm / S ~ 200 mm / s, running over 700 mm.
  5. Capacity: 1000N. When the force value exceeds 1000N, it will stop automatically.
  6. Straight slide rail is equipped with cement fiber board.
  7. Machine dimension: 1750* 400 * 500mm L*W*H
    (you need to prepare a flat desktop to put the machine on).
  8. Power system: variable frequency motor and reducer, with mechanical brake, quantity, and force online display
  9. Synchronous belt drive, linear slide, automatic return;
  10. Power: one phase 220V 50Hz (could be customized too )

Floor Furniture Leg Abrasion Test Machine’s Test process

The test is fixed on the cement fiberboard according to the fixation method used in practice. Then, the cement fiberboard pasted with the sample is placed on the test platform. The test is started with one key, and the air cylinder automatically releases the weight head to start the test.

After the test, take out the cement fiber board to observe the damage to the sample.

Product Specification

1. Weight load:
32kg, 70kg, 100kg
2. Controller
PLC control and online display of speed and test force value.
2. Test speed:
150 mm / S ~ 200 mm / s, running over 700 mm;
3. Capacity :
1000N , When the force value exceeds 1000N, it will stop automatically
4. Cement fiberboard:
5. Straight slide rail is equipped with cement fiberboard
6. Machine dimension:
1750* 400 * 500mm L*W*H
（you need to prepare a flat desktop to put the machine ）
7. Power system:
variable frequency motor and reducer, with mechanical brake, quantity, and force online display
8. The standard configuration
Synchronous belt drive, linear slide, automatic return
9. Power :
One phase 220V 50Hz (could be customized too )
10.Net weight：
200kg

Applications

  • Furniture leg

The post Floor Furniture Leg Abrasion Test Machine appeared first on OTS TECHNIK.

]]> Intelligent Ink Rubbing Fastness Tester https://ots-testequipment.net/product/intelligent-ink-rubbing-fastness-tester/ Mon, 13 Mar 2023 06:05:04 +0000 https://ots.seowaimao.com/?post_type=product&p=1167 The ink rubbing fastness testing instrument tests the paper and paperboard with high smoothness. It does not apply to test materials with thicknesses over 0.5mm or paper and paperboard with good air permeability.

The post Intelligent Ink Rubbing Fastness Tester appeared first on OTS TECHNIK.

]]>

Product Specification

Operating Method Microcomputer Control
Display LCD
Specimen Size Minimum Size: 230*50 mm
Friction Speed 43 times/min ( 21,43,85, 106 times/min, adjustable)
Friction Load 908g ( 2LB), 1810g (4 LB)
Friction Stroke 60 mm
Friction Area 50*100 mm
frequency Setting 0~9999 times, auto-shutdown
Outside Dimension (L×W×H) 430×335×405 mm
Weight 40 Kg
Power AC2

Intelligent Ink Rubbing Fastness Tester Features

  1. Touch screen, PLC control system.
  2. Applicable in dry or wet rubbing or scuffing, wet bleed, transfer, wet smear, and functional tests.
  3. Arc moving model.
  4. Double testing station.
  5. The rub fastness tester has four testing speeds.
  6. Memory when power failure.

Applications

  • Paper
  • Prints
  • Paperboard
  • Label

The post Intelligent Ink Rubbing Fastness Tester appeared first on OTS TECHNIK.

]]> Lever Four Ball Friction Tester https://ots-testequipment.net/product/lever-four-ball-friction-tester/ Mon, 13 Mar 2023 05:31:32 +0000 https://ots.seowaimao.com/?post_type=product&p=1133 The friction testing machine is mainly applicable to the evaluation of lubricating oil. It has broad application prospects in various professional fields of tribology, petroleum, chemical, energy, and other industries, colleges, universities, research institutes (institutes), and other departments.

The post Lever Four Ball Friction Tester appeared first on OTS TECHNIK.

]]>

Product Specification

Maximum test force
10kN
The maximum test force is less than 4% and the error of test force indication
±5N
The relative error of the test force indication is more than 4% (inclusive) of the maximum test force
±1％
Loading mode of test force
Manual loading of weights
Maximum friction
200N
The relative error of friction indication shall not be greater than
±3%
Temperature control range
RT～250℃
Temperature control accuracy
+2℃
Spindle speed range
200r/min～2000r/min (Stepless adjustable)
Speed control accuracy
±10r/min
The taper of the spindle inner hole
1：7
Oil consumption for one test
10ml
Nominal diameter of special standard steel ball
φ12.7
Spindle motor power
1.5kW
Time display and control range of testing machine
1s～9999min
Overall dimensions of the testing machine (L *W * H) mm
1185×505×1565

Standard:

GB/T2679.5-1995 Determination of flexibility of paper and board (MIT flexibility meter method)

Applications

  • Petroleum
  • Chemical
  • Energy and other industries

The post Lever Four Ball Friction Tester appeared first on OTS TECHNIK.

]]> Luggage Walking Bump Abrasion Tester https://ots-testequipment.net/product/luggage-walking-bump-abrasion-tester/ Mon, 13 Mar 2023 03:43:47 +0000 https://ots.seowaimao.com/?post_type=product&p=1071 The leather case caster bumpy tester can detect wheeled suitcases, bags, strollers, etc. It can be used to test the quality of luggage when moving around. From the test mileage and test speed, we can know the thermal cracking of the wheel, the lost volume, and any deformation of the overall structure.

The post Luggage Walking Bump Abrasion Tester appeared first on OTS TECHNIK.

]]>

Product Specification

Model XB-OTS-1013
Test Speed 0~5 km/hr, adjustable
Bump Plate 5mm, 8 pieces
Belt Perimeter 380cm
Belt Width 76cm
Attachment Suitcase fixed seat adjustment
Machine Size (L*W*H) 220*180*160 cm
Weight 360 Kg
Power 220V/50Hz
Design Criteria QB/T 2920-2007

Applications

  • Luggage

The post Luggage Walking Bump Abrasion Tester appeared first on OTS TECHNIK.

]]> Martindale Abrasion And Pilling Tester Machine https://ots-testequipment.net/product/martindale-abrasion-and-pilling-tester-machine/ Mon, 13 Mar 2023 03:45:28 +0000 https://ots.seowaimao.com/?post_type=product&p=1028 The Martindale abrasion and pilling test machine is capable of determining the abrasion and pilling resistance of all textile structures. The sample is rubbed against a known abrasive under low pressure and continuously changing orientation. And compare the amount of wear or pilling with standard parameters.

The post Martindale Abrasion And Pilling Tester Machine appeared first on OTS TECHNIK.

]]> Product Specification

Textile Martindale Abrasion Tester determines all textile structures’ abrasion and pilling resistance. Samples are rubbed against known abradants at low pressures and continuously changing directions. And the amount of abrasion or pilling is compared against standard parameters.

The unique design of the Martindale tester allows the removal of individual sample holders for examination without lifting the top motion plate. Martindale tester provides individual counters and parking functions, interval time settable, large touch-screen display, Standard sample holders, and nine and 12kpa Weights are included. Martindale Tester is available with 4, 6, 8, or 9 test positions.

Textile Martindale Abrasion Tester Specifications:

Drive system: PLC, programmable control with Touch-screen

Adjustable test speed

a) Max stroke of movement: 60.5+/-0.5mm

b) Weight of holder and spindle: 200+/-1g

Pilling test

a) Max stroke of movement: 24+/-0.5mm

Weight of holder and spindle: 155+/-1g

Models:

TF210A Martindale Abrasion And Pilling Tester-4 Heads

TF210B Martindale Abrasion And Pilling Tester-6 Heads

TF210C Martindale Abrasion And Pilling Tester-8 Heads

TF210DMartindale Abrasion And Pilling Tester-9 Heads

Standard Accessories (included):

Abrasion test (To ISO 12947-1)

a) Table specimen mounting Weight (2.5+/-0.5kg, 1Pc for both abrasion and pilling test)

b) Abrasion tester holder (Dia. 38 mm, Set of 4)

c) Small loading Weight (395+/-7 amount to holder etc, set of 4)

d) Large loading Weight (595+/-7g amount to holder etc, set of 4)

Pilling Test (To ISO 12945-2)

a) Linear adaptor. To convert to straight-line motion.

b) Sample Retaining Rings for the pilling test (Pack of 4)

c) Pilling test holder (Dia. 90mm,set of 4)

d) Loading Weight (260+/-1g, set of 4)

Auxiliary device for specimen mounting

Optional orders (Excluded):

a) Test Specimen Cutter. (38mm diameter/12cm²) With a cutting mat and spare blades.

b) Abradent Fabric & Backing Felt Cutter. (140mm diameter/154cm2) With a cutting mat and spare blades.

c) Standard Wool Abradent Fabric SM25. 1.6M wide x 5M length – For abrasion test and pilling test(when automatic)

d) Standard Backing Foam. Width 1.5M, Length 0.5M.

e) Standard Backing Wool Felt Piece (woven) – 1m x 1.5m.

f) EMPA Photographic Standards for Pilling Test (3 x 4 knitted)

g) EMPA Photographic Standards for Pilling Test (3 x 4 woven)

h) SM 50 Photographs for Pilling Test IWS + ASTM.

Martindale Abrasion Testing Machine Standards

EN ISO 12945-2/12947-1/12947-2/12947-3/12947-4, ISO 20344, ASTM 4966/4970, BS EN 388/530, BS 3424/5690, JIS L1096, DIN 53863/53865, GB/T 13775, SATRA TM31, IS 12673, IWSTM 112/196, IWTO 40-88, SFS 4328, NEXT 16, GMW15651, ISO 5470-2, M&S 17 / 19 / 19C, Next 18/18a/18b, GB/T4802.2/21196-1/21196-2, Wool Mark TM 112/196

Note: Textile Martindale Abrasion Tester can conform to but is not limited to the standards above. For more standards conformance, please get in touch with us.

The post Martindale Abrasion And Pilling Tester Machine appeared first on OTS TECHNIK.

]]>