Drop Equipment | Drop Test Machine Supplier https://ots-testequipment.net/drop-test-machine/ Tue, 01 Apr 2025 07:30:04 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://ots-testequipment.net/wp-content/uploads/2023/11/cropped-site-icon-32x32.webp Drop Equipment | Drop Test Machine Supplier https://ots-testequipment.net/drop-test-machine/ 32 32 Battery Drop Test Machine https://ots-testequipment.net/product/battery-drop-tester/ Fri, 10 Mar 2023 11:10:38 +0000 https://ots.seowaimao.com/?post_type=product&p=971

Battery drop tester is available for package face, corner, and edge-free drop testing. It has an altitude digital display and tracks altitude with an encoder. It is possible to measure precise drop heights. This dropping battery test machine adopts a pneumatic structure and fixes the specimen with special clamps. Press the drop button, the cylinder is opened, and the sample falls freely. The drop height is controllable, and a height steel ruler is attached to provide the drop height. There are various drop floors. Meet different test standards.

The post Battery Drop Test Machine appeared first on OTS TECHNIK.

]]>

Product Specification

Model XB-OTS-657
Drop Height 300~1500mm(Controllable, steel ruler ,min.indication value :1mm)
Testing Method Face, edge, corner dropping
Max Test Loading 2kg±100g
Drop floor material A3steel plate (Acrylic plate, marble plate, wooden plate optional )
Drop floor dimension 500 x 600 x 200mm(solid plate)
Machine dimension W700 X D900 X H1650mm
Drop method Pneumatic dropping
Height display Altimeter height control, LED number, Accurate to 1 mm
Air Source <1mpa
Control box 210×180×140mm
Power supply 1∮，AC220V，ф5A
Machine weight 80KG

Dropping Battery Test Machine Features

  1. Battery drop test for the face of the package, Angle, and edge for the free drop test. It has a digital display and a high display decoder to track height and drop height. So it can accurately give products with preset drop height error of less than 2%, or 10 mm.
  2. The battery drop test machine adopts a single arm double column structure with electric reset, electric control drop, and electric lifting device. This battery drop test equipment is easy to use.
  3. The unique hydraulic buffer device dramatically increases the machine’s service life, stability, and security.

The post Battery Drop Test Machine appeared first on OTS TECHNIK.

]]> Double-Arm Free Fall Drop Test Machine https://ots-testequipment.net/product/double-arm-free-drop-testing-machine/ Mon, 13 Mar 2023 06:15:49 +0000 https://ots.seowaimao.com/?post_type=product&p=1182 During product handling or transport, there may be drops/falls, resulting in product damage. This device simulates the drop/ fall of a finished product to evaluate the damage. The free fall drop test machine can test rhombohedrons, angles, and faces.

The post Double-Arm Free Fall Drop Test Machine appeared first on OTS TECHNIK.

]]>

Product Specification

Model XB-OTS-220B
Type The double arm supporting the specimen
Test height(mm) 300-1500mm
Test space 1200*1700*1500mm (W*D*H)
Max. specimen weight 60 KG
Overall weight 400Kg
Overall size(mm) 1200*1500*2100mm
Base plate size 1200*1400mm
Single Arm size 300*750mm
Control method By electronic controller box
Dropping method Pneumatic cylinder
Height display LCD reads drop height
Height adjustment Servo motor controlling precision guiding
Buffer type Oil pressure absorbability
Power AC220V 50Hz 1 Phase
Comply with ISTA-1A ISO2248-1972(E), JIS Z0202-87,GB/T4857, 5-92.

Arm Drop Test Machine Features

  1. A precision grinding shaft lever, high precision, and good stability use the spindle.
  2. LCD screen displays multi-parameter.
  3. Power failure safety design keeps the original state when the power fails.
  4. The free fall drop tester has an up-and-down lifting limitation set.
  5. The free fall drop test equipment adopts a single arm support test object.
  6. The swing arm system is controlled by air pressure.
  7. Free adjust pressure and speed up to 2G with object weight.
  8. Test electronic parts, finished products, or the angled surface of the package container.
  9. Decompression change design, low noise.
  10. Best after-sales service: One year of free parts maintenance.
  11. Meet international test standards.
  12. Customization is available & welcomed.

Drop Test Arm Machine Applications

  • Bottle
  • Package
  • Carton box
  • Corrugated case

The post Double-Arm Free Fall Drop Test Machine appeared first on OTS TECHNIK.

]]> Drop Test Machine https://ots-testequipment.net/product/drop-tester/ Mon, 13 Mar 2023 05:52:40 +0000 https://ots.seowaimao.com/?post_type=product&p=1157

A drop testing machine measures the dropping impact incidence when the package is used, transported, and decorated. Labtone "1G+" project strictly ensures accuracy. Besides precision plane drop testing, it also can undertake edge and angle tests to ensure the complete performance evaluation for the package.

The post Drop Test Machine appeared first on OTS TECHNIK.

]]>

Product Specification

Model XB-OTS-220A Drop Impact Tester
Plate thickness 10 mm
Deviation of dropping horizon < 1°
Dropping deviation < ±10 mm
Horsepower 1/2 HP
Accuracy Grade 0.5
Test height(mm) 300mm~1500 mm
Test space 870*740*400~1600mm (W*D*H)
Max. specimen weight 0~60 KG
Overall weight 420Kg
Overall size(mm) 1200*1500*2115mm
Base plate size 1200*1400mm
Single Arm size 300*750mm
Control method By electronic controller box
Dropping method Pneumatic cylinder
Height display LCD reads drop height
Height adjustment Servo motor controlling precision guiding
Buffer type Oil pressure absorbability
Power AC220V 50/60Hz 1 Phase
**Design Criteria : ISTA-1A ISO 2248, JIS Z0202-87, GB/T4857.5-92
 

* NOTE: All kinds of fixtures elongation measurement devices, and other accessories can be equipped depending on the client’s demand. Our company would give clients the most appropriate advice.

Drop Tester Machine Features

  1. A precision grinding shaft lever, high precision, and good stability use the spindle.
  2. LCD screen displays multi-parameter.
  3. Power failure safety design keeps the original state when the power fails.
  4. Up and down lifting limitation set.
  5. The drop tester adopts a single-arm support test object.
  6. The swing arm system is controlled by air pressure.
  7. Free adjust pressure and speed up to 2G with object weight.
  8. Test electronic parts, finished products, or the angled surface of the package container.
  9. Decompression change design, low noise.
  10. Best after-sales service: One year of free parts maintenance.
  11. Meet international test standards.
  12. Customization is available & welcomed.
 
Drop-Tester-Machine-Panel

Drop Tester Applications

 
  • Bottle
  • Package
  • Carton box
  • Corrugated case
  • Battery

The post Drop Test Machine appeared first on OTS TECHNIK.

]]> Mobile phone micro drop test machine https://ots-testequipment.net/product/drum-drop-test-machine-duplicate-1/ Mon, 25 Dec 2023 03:27:20 +0000 https://ots-testequipment.net/?post_type=product&p=4528 This drum drop test machine is suitable for roll-and-drop tests of mobile phones and similar products. It has a 6-digit digital display and counting function and can test 2 samples simultaneously in 2 test bins. The mobile phone drum drop testing machine is suitable for mobile phones, PDAs, electronic dictionaries, CDs, MP3s, remote controls, and other small portable electronic products for continuous slewing and falling tests. After N times of falling and falling behind, the product's ability to withstand rotary drop can be evaluated by setting the number of times to reach.

The post Mobile phone micro drop test machine appeared first on OTS TECHNIK.

]]> Product Specification
Model XB-OTS-300/1S
Test amount 1 PCS
Drop mode Pneumatic
Test load (max) 5Kgf(max)
Drop height 10~500mm (Customized )
Test Times 1~20 times /min can be set
Controller LCD touch screen +PLC control
Dimension (WxDxH) W800*H600*D1150mm
Weight Around 100kg
Height of protective fence 150 mm (safety protection)
Air source ≥0.5MPa
Power supply AC220V 50Hz 3A or specified by user
Remark Moving of upper and lower fixed guide rails

Principle

  1. The lifting cylinder drives the upper clamp (air finger) down to clamp the mobile phone, and the mobile phone will fall freely when the air finger is released. At this time, the double acting cylinder retracts and pushes the mobile phone to the position where the upper clamp can clamp. The lifting cylinder drives the upper clamp (air finger) down to clamp the mobile phone, and the mobile phone will fall freely when the air finger is released. This process is repeated until the set number of times.

    Product features: can set the number of automatic stop
    1. Drop surface material: aluminum, 12mm thick.
    Prompt function: it can set the fixed value of the number of keys and stop the test automatically.
    2. The machine adopts the rodless cylinder as the driving source for lifting and dropping the mobile phone, and is equipped with the precision double acting cylinder for homing action, which is durable; It can realize the repeated drop of mobile phone and other products to detect the impact resistance of products falling from a certain height;
    3. Due to the use of pneumatic components and autocratic control mode, the test speed and reliability are greatly improved; Using Panasonic LCD touch control panel + PLC programmable controller for action program control; Independent counting, reaching the set number of times to automatically stop the test

Applications

  • Mobile Phone
  • Tablet Computer
  • Electronic products

The post Mobile phone micro drop test machine appeared first on OTS TECHNIK.

]]> Drum Drop Test Machine https://ots-testequipment.net/product/drum-drop-testing-machine/ Mon, 13 Mar 2023 08:02:55 +0000 https://ots.seowaimao.com/?post_type=product&p=1294 This drum drop test machine is suitable for roll-and-drop tests of mobile phones and similar products. It has a 6-digit digital display and counting function and can test 2 samples simultaneously in 2 test bins. The mobile phone drum drop testing machine is suitable for mobile phones, PDAs, electronic dictionaries, CDs, MP3s, remote controls, and other small portable electronic products for continuous slewing and falling tests. After N times of falling and falling behind, the product's ability to withstand rotary drop can be evaluated by setting the number of times to reach.

The post Drum Drop Test Machine appeared first on OTS TECHNIK.

]]>

Product Specification

The number of rollers:
2
Allowable specimen weight:
2kg(Max)
Drop height:
500 or 1000mm (Customizable)
Drum width:
350mm
Rotary speed:
5-20 times /min
Turns:
1-999999 (adjustable)
Machine size:
1100*725*1440mm
Weight:
65kg
Power:
AC220V 50HZ 5A or designated
Chassis:
Made of anti-static powder paint

Drum Drop Test Machine Features

  1. The unique design of this machine can meet the requirement of simultaneous testing of 500 or 1000mm drop height. At most, two mobile phones can be tested simultaneously.
  2. This drum drop tester adopts a speed-regulating motor and governor made in Taiwan to set the speed. Capable of synchronous pulley/transmission, very low start-stop noise, and smooth operation.
  3. The operation panel design is simple and easy to control. The frequency can be directly displayed, and the rotation can be controlled by inching to facilitate the loading and unloading of specimens.
  4. LCD can preset counter count and electric memory function. Reach the set times automatically stop.

Applications

  • Mobile Phone
  • Tablet Computer
  • Electronic products

The post Drum Drop Test Machine appeared first on OTS TECHNIK.

]]> Mobile Phone Drum Drop Tester https://ots-testequipment.net/product/mobile-phone-drum-drop-tester/ Mon, 13 Mar 2023 08:31:12 +0000 https://ots.seowaimao.com/?post_type=product&p=1344 IEC60068 mobile phone drum drop test machine is suitable for small portable electronic products such as mobile phones, PDAs, electronic dictionaries, CDs, MP3s, and remote control equipment. AS-DT-150 has two testing zones that can do the test simultaneously. Through the testing times, reach to set, then check whether the testing samples are damaged.

The post Mobile Phone Drum Drop Tester appeared first on OTS TECHNIK.

]]>

Product Specification

Test Speed 5~20 times/min
Drop of Height 500mm and 1000mm
Free Fall Zones Two
Timer 1~999999 adjustable
Max. Load 5Kg
Power AC220V
External dimension 1500*1300*1150mm
Weight about 200Kg

Applications

  • Mobile phone
  • PDA
  • Electronic dictionaries
  • CD
  • MP3
  • Remote control device
  • Electronic products

The post Mobile Phone Drum Drop Tester appeared first on OTS TECHNIK.

]]> Mobile Phone Free Fall Drop Tester https://ots-testequipment.net/product/mobile-phone-free-fall-drop-testing-machine/ Mon, 13 Mar 2023 08:20:47 +0000 https://ots.seowaimao.com/?post_type=product&p=1323 This free fall drop test machine is suitable for small consumer electronic products and parts such as mobile phones (cell phones), walkie-talkies, electronic dictionaries, intercom phones for apartment buildings, CD/MD/MP3, etc. It conforms to the standard of JIS C 0044 IEC 60068-2-32.

The post Mobile Phone Free Fall Drop Tester appeared first on OTS TECHNIK.

]]>

Product Specification

Drop Height: 10-500mm adjustable
Drop Method: pneumatic
Test Station: 1 station
Allowable Test Piece Weight: 5kg (max)
Control Method: LCD touch screen + PLC control
The number of drops: 1-20 times/min can be set
Impact Floor: A3 iron plate
The height of the protective fence: 150mm (safety protection)
Machine size: W400*H400*D1400mm
Mode of operation: Up and down fixed rail movement
Machine weight: about 45kg
Air source: ≥0.5Mpa
Power supply: 220V/50H

Free Fall Drop Test Machine Key Operation Description

  • Test speed: Set the test speed
  • Number of times setting: Set the number of tests
  • Set the height: Set the drop height
  • Pause time: The pause time is set after rising to the set height
  • Current height: Displays the current test height
  • Current Number: Displays the number of tests currently completed
 
Mobile-Phone-Free-Fall-Drop-Tester-test-interface
 

Applications

  • Small consumer electronic products
  • Mobile phones
  • Cell phones
  • Walkie-talkies
  • Electronic dictionaries
  • CD
  • MD
  • MP3

The post Mobile Phone Free Fall Drop Tester appeared first on OTS TECHNIK.

]]> Mobile Phone Orientation Drop Testing Machine https://ots-testequipment.net/product/mobile-phone-orientation-drop-testing-machine/ Mon, 13 Mar 2023 08:01:37 +0000 https://ots.seowaimao.com/?post_type=product&p=1292 This drop testing machine is suitable for mobile phones (mobile phones), mobile lithium batteries, walkie-talkies, electronic dictionaries, apartment walkie-talkies, MP3s, and other small electronic products.

The post Mobile Phone Orientation Drop Testing Machine appeared first on OTS TECHNIK.

]]>

Product Specification

The maximum test height:
400-1800mm, displacement accuracy is ± 0.5mm
Maximum drop weight:
5kg
Operation:
PLC programming touch screen control
The minimum departure height:
400mm
Counter:
0 — 999999 (configurable)
Use air source:
≥0.5MPa
After the test, the drop speed m/s is automatically displayed

Orientation Drop Test Machine Features

  1. Free electronic control switch of three vacuum suction cups.
  2. Automatically return to the adsorption position after each fall.
  3. The drop and adsorption heights can be set, and the number of drops can be displayed/cleared.
  4. Safety door protection function.
  5. Directional drop test, free drop test, automatic and manual function, benchmark height compensation function, fall height, final landing speed, and test data can be set.
  6. The measured body is released at the height of 400mm, and the drop Angle of the product is close to the Angle set by the test, Drop Angle error of 1-3 degrees. Various drop plates are available: steel plate, wood, and marble SLATE, applicable to the test requirements of many countries.
 
Mobile-Phone-Orientation-Drop-Testing-Machine-Controller
 

Applications

  • Mobile Phone
  • Mobile Lithium Battery
  • Walkie-Talkie
  • MP3
  • Other Small Electronic products

The post Mobile Phone Orientation Drop Testing Machine appeared first on OTS TECHNIK.

]]> Standard Box Clamping Force Tester Machine https://ots-testequipment.net/product/standard-box-clamping-force-testing-machine/ Mon, 13 Mar 2023 06:19:33 +0000 https://ots.seowaimao.com/?post_type=product&p=1185 The clamping force tester is designed to measure the ability of the packaging to protect the product when it is subjected to horizontal pressure during transportation and storage. Product packaging quality can be improved through testing.

The post Standard Box Clamping Force Tester Machine appeared first on OTS TECHNIK.

]]>

Product Specification

Specimen shape Parallelepiped transport package
Maximum specimen weight 600kg
Clamping pressure force According to the transport diagram on the test sample, the operator can add 400-3000Lb (adjustable) pressure force on the corresponding surface.
Clamping plate size Height 48inch X depth 48inch
Clamping plate adjustable height 0~1000mm
Base plate dimension 2200 X 2100mm
Motor Panasonic Servo Motor
Accuracy within ±5%
Clamping plate requirement Make the two clamping boards flat and non-deform under work conditions (2000 Pounds) and make the clamping boards parallel and clamping board and land vertical. The clamping board is thicker than 25mm.
Clamping force rate 0.25-2.5mm/sec (according to ISTA 6- SAMS CLUB)
Force corrector It displays force value and is used to calibrate clamping force.
Calibration accuracy ±1% F.S
Device width Less than 2.5m
Weight approx. 2000kg
Power 220v/ 60Hz
Controller: Touch screen type, which can control & display the speed and force
Function the clamp can be up and down
Control Computer controlled type

Clamp Force Tester Applications

  • Paper Package
  • Cardboard
  • Carton box
  • Corrugated case

The post Standard Box Clamping Force Tester Machine appeared first on OTS TECHNIK.

]]> Standard Free Drop Testing Machine https://ots-testequipment.net/product/standard-free-drop-testing-machine/ Mon, 13 Mar 2023 06:13:43 +0000 https://ots.seowaimao.com/?post_type=product&p=1179 The free fall drop tester is mainly used for more extensive package drop tests. Zero height drop tester uses a quickly moves down E fork mounting as a bracket. The specimen places balance as the test requirement (plane, edge, angle). When doing the test, the bracket does high-speed downward movement before the specimen. The acceleration >3g, needs to guarantee the bracket separates from the specimen and realizes free fall. The standard drop height range is 2.54 cm-120 cm.

The post Standard Free Drop Testing Machine appeared first on OTS TECHNIK.

]]>

Product Specification

Drop Height 100~500 mm
Drop Platform Area (L×W) 1700×1200 mm
Specimen Max. Size (W×D×H)1620×750×2050mm
Max Drop Weight 150 Kg
Outside Dimension (W×D×H)1400×1800×1500mm
Power AC220V,50Hz,1 KW
Transmit Approach Motor-driven ball screw
Horsepower 1 HP
Design Criteria ISO 2248, JIS Z0202-87, GB/T4857.5-92

Free Drop Test Machine Features

  1. A precision grinding shaft lever, high precision, and good stability use the spindle.
  2. LCD screen displays multi-parameter.
  3. Power failure safety design keeps the original state when the power fails.
  4. The free fall drop tester has an up-and-down lifting limitation set.
  5. Adopt single arm supports test object.
  6. The swing arm system of this free fall drop test equipment is controlled by air pressure.
  7. Free adjust pressure and speed up to 2G with object weight.
  8. Test electronic parts, finished products, or the angled surface of the package container.
  9. Decompression change design, low noise.
  10. Best after-sales service: One year of free parts maintenance.
  11. Meet international test standards.
  12. Customization is available & welcomed.

Applications

  • Bottle
  • Package
  • Carton box
  • Corrugated case

The post Standard Free Drop Testing Machine appeared first on OTS TECHNIK.

]]>