Paint Testing Equipment Manufacturer - OTS https://ots-testequipment.net/paint-testing-equipment/ Wed, 05 Feb 2025 09:05:03 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://ots-testequipment.net/wp-content/uploads/2023/11/cropped-site-icon-32x32.webp Paint Testing Equipment Manufacturer - OTS https://ots-testequipment.net/paint-testing-equipment/ 32 32 Mar Resistance Tester XB-OTS-CO106 https://ots-testequipment.net/product/mar-resistance-tester/ Mon, 20 Jan 2025 02:50:37 +0000 https://ots-testequipment.net/?post_type=product&p=5231 Mar resistance test is similar to a scratch test for coatings, but in a different way: this is to abrasion the coatings evenly covered on the subjects by a circular needle at 45° and keep abrasion until the coating is broken. The minimum load for coating scratches is the load that causes at least 2 out of 5 measurements.

This machine is designed under GB/T 31591-2015 "Determination of abrasion resistance of color paints and varnishes" standard.

The post Mar Resistance Tester XB-OTS-CO106 appeared first on OTS TECHNIK.

]]>

Features

  • The workstation can be moved back and forth, which is convenient for users to quickly replace different test areas on the same place.
  • Large working platform, which is suitable for different sizes of test board (Max test board size 200*100mm).
  • Adjustable balance arm, this allows abrasion resistance test oin different thickness (0mm-12mm) templates.

Specification of Mar Resistance Tester

  1. Power: 15kW
  2. Stroke: 80mm
  3. Weight: 100g: 1pc; 200g: 2pcs; 500g: 1pc; 1000g: 2pcs; 2000g: 1pc
  4. Needle: Circular needle: D.（6.5±0.1）mm, R0.8±0.02
  5. Thickness:（1.6±0.02）mm Hardness: 56~58
  6. Smooth surface: (roughness <0.05μm)
  7. Needle movement speed: 3 mm/s～10 mm/s(0.5mm level I, adjustable)
  8. Test thickness: 0~12mm
  9. Test width: 40~110mm
  10. Angle of needle and test board:45°
  11. Power: 110~220V 50~60Hz, 24V output, 2A

The post Mar Resistance Tester XB-OTS-CO106 appeared first on OTS TECHNIK.

]]> Impact Resistance Tester XB-OTS-CO107 https://ots-testequipment.net/product/impact-resistance-tester/ Fri, 17 Jan 2025 01:58:33 +0000 https://ots-testequipment.net/?post_type=product&p=5225 According to the GB1732- 79 standard design, heavy objects falling from high-impact films can determine the film's impact strength.

The post Impact Resistance Tester XB-OTS-CO107 appeared first on OTS TECHNIK.

]]>

Working Principle

The controller screw sets the hammer at a height, and it can be read from the position mark. Pressing the controller screw, its spring is compressed. At the same time, the round hole of the controller slider, the cover, and the bottom are directly connected so that when connected, the hammer falls down, impacting the punch rod, and the punch rod acts down on the template of the pillow block in advance. Then, lift the weight body and take out the tested sample to observe the paint film test on the sample.

Specifications

(1) The instrument scale length is 0~50 cm, 0~ 100 cm, and the indexing is 1 cm.

(2) The weight of the hammer is 1000 grams, and there is a hook that can be passed off. The weight of the hammer can be changed by adding or removing lead particles.

(3) The steel ball at the end of the impact rod is 8 mm.

(4) The impact rod’s depth inserted into the pillow block’s concave hole is 2 mm.

(5) The curvature radius of the edge in the pillow block: 2.5~3.0 mm. The concave hole size: D.15 mm.

(6) Machine weight: 11kg/20 kg.

(7)  Machine size: 250×140×830 mm

The post Impact Resistance Tester XB-OTS-CO107 appeared first on OTS TECHNIK.

]]> Automatic Drawing Ring Method Adhesion Tester XB-OTS-CO101 https://ots-testequipment.net/product/automatic-drawing-ring-method-adhesion-tester/ Fri, 17 Jan 2025 01:19:07 +0000 https://ots-testequipment.net/?post_type=product&p=5223 This machine is designed according to the standard GB/T 1720. The Automatic Drawing Ring Method Adhesion Tester is made of aluminum board with a coating, pained into OTS blue and gray. It is better looking and also has an anti-rust function.

The post Automatic Drawing Ring Method Adhesion Tester XB-OTS-CO101 appeared first on OTS TECHNIK.

]]>

Working Principle

For testing the adhesion ability of building material, the traditional way is to test in the loop method: by drawing the same size circles in different positions and checking the crossed part–usually 7 parts. Check its station and judge the coating quality.

Features

  • Special indicator lights automatically judge if the coating is broken after testing.
  • The needle is specially designed and is of top quality.
  • The electric finish of the circle test is uniform speed and constant force, which makes the test results highly accurate.
  • The sliding platform is convenient for multiple tests in different positions on the same test plate.
  • The rotary working arm design is very convenient for changing the needle and test plate.
  • Use double nuts to adjust the lead screw clearance to make the platform runs more smoothly, so as to reduce the error caused by the thread clearance, and the data is more accurate.
  • The working platform adopts a double guide limit, which is more stable than a single guide rail.
  • After a single test is completed, you can return to the starting point with one click button.
  • Special tool needle installation and disassembly make the test more convenient and fast.
  • Precision machining thread control ring diameter, to make accurate test results.

Specification of Automatic Drawing Ring Method Adhesion Tester

  1. Radius of rotation: R=5.25mm
  2. Loop length: 75mm
  3. No-load pressure: 200g
  4. Weight: 100g, 200g, 500g
  5. Needle: tip radius (0.05±0.01) mm, the Angle is 25°
  6. Needle speed: about (80~100) RPM
  7. Machine size: 400*258*375mm LWH
  8. Weight: 18KG

The post Automatic Drawing Ring Method Adhesion Tester XB-OTS-CO101 appeared first on OTS TECHNIK.

]]> Automatic Film Grid Method Tester XB-OTS-CO102 https://ots-testequipment.net/product/automatic-film-grid-method-tester/ Fri, 17 Jan 2025 00:48:00 +0000 https://ots-testequipment.net/?post_type=product&p=5221 The grid method is an initial test judgment for the adhesion of building material and coating. Designed under standard ISO 2409-2019, this machine can perform the Grid Method automatically with more accurate results.

The post Automatic Film Grid Method Tester XB-OTS-CO102 appeared first on OTS TECHNIK.

]]>

Test standard

ISO 2409
GB/T 9286

Features

  • Equipped with a 7-inch touchscreen controller, the user can edit the test date easily.
  • Cutting speed, cutting distance, and cutting grid quantity can be set.
  • Automatically fix the samples, making them easier to test.
  • After cutting, the working station turns 90 ° to avoid incomplete vertical crosses made by human operation.
  • Equipped with a special test cutting head: φ1mm, which can satisfy GME 60280 standard: Complete scratch resistance test of plastic parts of automotive interior according.

Specification Automatic Film Grid Method Tester

  1. Test plate size: 150*100*(0.5~20)mm
  2. Cutting pressure: 2~50N Adjustable
  3. Cutting speed: 1~40 mm/s
  4. Min Cutting space: 0.5mm
  5. Max. Cutting space: 40mm/grid numbers-1
  6. Angle range: 25° ~ 90°
  7. Power: 220V 50/60Hz, 80W
  8. Machine size: 540*335*380mm LWH
  9. Machine weight: 27Kg

The post Automatic Film Grid Method Tester XB-OTS-CO102 appeared first on OTS TECHNIK.

]]> Intelligent Image Recognition Brush Resistant Tester XB-OTS-CO301 https://ots-testequipment.net/product/intelligent-image-recognition-brush-resistant-tester/ Thu, 16 Jan 2025 09:11:12 +0000 https://ots-testequipment.net/?post_type=product&p=5218 For the wet scrubbing resistance of architectural coatings and related products, it is generally defined that the test end point is when the coating is chafed to a certain length: and the outer wall coating and ASTM 2486 method requires the damaged length exceeding its gasket width (12.7mm).

The XB-OTS-CO301 is equipped with the function of automatically identifying and calculating the length of the test sample from scratch to the substrate. It can monitor the scrubbing resistance of the samples in two channels at the same time, without the need for human eyes to see the sample, and once the bare bottom length of the test sample reaches the "threshold" set by the operator, The instrument will automatically shut down and record the current number of scrubs, truly unattended.

The post Intelligent Image Recognition Brush Resistant Tester XB-OTS-CO301 appeared first on OTS TECHNIK.

]]>

Features

  • Double working channel design: each channel can be visually measured by the length of the dew floor. When the set threshold is exceeded, it automatically stops.
  • The machine is made of anodized aluminum, which makes the test more stable. and the test results are repeatable, even at the fastest friction speed
  • The washing medium flows into the brush through the peristaltic pump on the side of the machine, and the drip acceleration can be adjusted accurately.
  • Installed in an 8-inch capacitive touch screen, it clearly displays smooth operation.
  • Equipped with a variety of friction heads to meet different standards: ISO, ASTM, DIN, and GB.
  • Loading and unloading the test template and replacing the friction head is extremely convenient and fast.
  • Not affected by voltage frequency
  • Push-rod design, stable and even running speed
  • Double slide design can perform two tests at the same time
  • Strong design, durable use

Specification of Intelligent Image Recognition Brush Resistant Tester

  1. Brush load: 450±10 g
  2. Running stroke: 300mm
  3. Operation times:0~99999 time
  4. Power: 110V/220V；50/60HZ
  5. Glass board size: 430*306mm
  6. Washing medium capacity:1L
  7. Running speed：5-95 rpm, 5-60 rpm by observation
  8. Machine: 590*460*720mm
  9. Weight:30KG

The post Intelligent Image Recognition Brush Resistant Tester XB-OTS-CO301 appeared first on OTS TECHNIK.

]]> Ink Friction Tester XB-OTS-CO204 https://ots-testequipment.net/product/ink-friction-tester/ Thu, 16 Jan 2025 07:12:46 +0000 https://ots-testequipment.net/?post_type=product&p=5216 OTS designed the Ink Friction Tester under the standard GB/T 7706. It is used to judge the quality of interior decorative wallpaper printing ink.

The instrument is driven by a motor so that the test sample loaded with a specific weight can be rubbed on a standard surface (friction speed and frequency can be directly displayed on the LCD screen). The friction resistance of the ink can be assessed according to the number of friction and the degree of friction damage.

The post Ink Friction Tester XB-OTS-CO204 appeared first on OTS TECHNIK.

]]>

Specification

  1. Friction speed: 5~95 times/min adjustable, standard is 43 times/min; ±2
  2. Times range: 0~99999 times
  3. Friction load: head: 10N±0.1N: 1pc; extra weight:10N±0.1N: 1pc
  4. Friction stroke: 60mm
  5. Friction medium: 80g/m2 clean paper with a width: 50mm
  6. Power: 110~220V 50~60Hz 30W
  7. Machine size: 330*370*330mm
  8. Weight: 15KG

The post Ink Friction Tester XB-OTS-CO204 appeared first on OTS TECHNIK.

]]> Electronics Coating Wear Resistance Tester XB-OTS-CO206 https://ots-testequipment.net/product/electronics-coating-wear-resistance-tester/ Thu, 16 Jan 2025 06:26:22 +0000 https://ots-testequipment.net/?post_type=product&p=5214 This machine is designed according to ASTM D 8380-21 Standard: Test of Dry Abrasion Resistance on Hydrophobic and Omniphobic Coatings.

The machine adopts a single-chip microcomputer intelligent control, step-less speed regulation, and automatic counting function. The LCD touchscreen directly displays the friction speed and times and sets the number of tests. The glass workstation is for easy cleaning. It has the advantages of reasonable structure, reliable performance, and simpler operation.

The post Electronics Coating Wear Resistance Tester XB-OTS-CO206 appeared first on OTS TECHNIK.

]]>

Specification

  1. Friction stroke: 30mm±1mm
  2. Friction frequency: 60cpm±5cpm
  3. Friction load: 10N±0.5N
  4. Friction head size:（10±1）mm×（10±1）mm（area: 1.0 cm²）
  5. Friction medium: 0000# wire brush
  6. Timer: 0-9999 times
  7. Power: AC 110～220V；50～60 Hz；
  8. Machine size: 70*310*340mm
  9. Weight: 15Kg

The post Electronics Coating Wear Resistance Tester XB-OTS-CO206 appeared first on OTS TECHNIK.

]]> Digital Intelligent Inkometer XB-OTS-CO304 https://ots-testequipment.net/product/digital-intelligent-inkometer/ Thu, 16 Jan 2025 05:57:12 +0000 https://ots-testequipment.net/?post_type=product&p=5212 The Digital Intelligent Inkometer adopts the highest configuration: PLC (Siemens) + touch screen controller (Taiwan Weilon) + servo motor (Taiwan Delta). It can more clearly display the instantaneous copper roll revolution and water tank temperature. It also automatically adjusts the test data even if it does not meet the requirements (servo motor installed, ensure that the speed is under 1 revolution).

The post Digital Intelligent Inkometer XB-OTS-CO304 appeared first on OTS TECHNIK.

]]>

Specification

  • Copper roller spindle revolution:
    1. 400 RPM;
    2. 800 RPM;
    3. 1200 RPM;
    4. 1600 RPM;
    5. 2000 RPM
  • Speed range: 100~200 RPM
  • Power: 220V 50/60Hz
  • Total power: 1600 W (800W motor, 800W water tank)
  • Pump flow: 10 L/min (thermostatic water tank capacity: 8 L)
  • The horizontal error of the main shaft copper roll after leveling the table is 0.03mm
  • Thermostatic water tank temperature error :
    Single thermostatic water tank (standard) → error ±0.2 ℃;
    Dual-use thermostatic water tank (optional) →±0.1 ℃
  • Display accuracy: 0.1 ink viscosity unit
  • Test accuracy: retest error ±0.3 ink viscosity unit under the same test conditions
  • Print: test time, number, temperature, speed, viscosity value
  • Standard with easy disassembly, easy cleaning inker
  • Machine size: 750*300*480mm
  • Total weight: 130KG
  • Noise: ≦50 dB

The post Digital Intelligent Inkometer XB-OTS-CO304 appeared first on OTS TECHNIK.

]]> Automatic Scratch Resistance Tester XB-OTS-CO105 https://ots-testequipment.net/product/automatic-scratch-resistance-tester/ Thu, 16 Jan 2025 03:49:34 +0000 https://ots-testequipment.net/?post_type=product&p=5210 Film strength, hardness, and adhesion are important physical properties of the film. It directly affects the wear resistance, wear-resistant grain, and scratch resistance. The impact resistance and the retention of the coating film, and the difficulty of cleaning, so the strength and hardness of the coating film are the necessary indicators to evaluate the performance of the coating. The use of this instrument can be a convenient and comprehensive assessment of the film's strength, hardness, adhesion, and other physical characteristics. So the purpose of this instrument is to characterize the strength, hardness, and adhesion of the coating through the penetration resistance of the paint film template coating when the needle scratches it.

The post Automatic Scratch Resistance Tester XB-OTS-CO105 appeared first on OTS TECHNIK.

]]>

Test standard

GB/T 9279.1-2015
ISO 1518-1BS 3900：E2
BS EN 13523-12

Features

  • The working platform can move back and forth, which makes it more convenient for users to quickly switch different test areas on the same test working station.
  • Larger working platform, it is suitable for different sizes of test board (Max.e200*100mm)
  • The needle scratches through the test plate are the use of a sound and light alarm system, which is more intuitive.

Specification of Automatic Scratch Resistance Tester

  1. Standard needle size: R. (0.50±0.01) mm, hemispherical
  2. Angle between marker and template: 90°
  3. Test load: (0.5N/1, 1N/1, 2N/2, 5N/1, 10N/1) constantly
  4. Scratching speed: (35±5) mm/s
  5. Stroke: 120mm
  6. Max test sample size: 200*100mm
  7. Max test sample thickness: ≦1mm
  8. Motor power: 220V 50hz, 30W
  9. Machine size: 560*270*380mm LWH
  10. Machine weight: 17KG

The post Automatic Scratch Resistance Tester XB-OTS-CO105 appeared first on OTS TECHNIK.

]]> Automatic Pencil Hardness Tester XB-OTS-CO103 https://ots-testequipment.net/product/automatic-pencil-hardnesstester/ Tue, 14 Jan 2025 05:36:50 +0000 https://ots-testequipment.net/?post_type=product&p=5208 The Automatic Pencil Hardness Tester is the fastest and most accurate machine for measuring the coating pencil hardness designed by OTS. This machine overcomes the disabled of traditional testers who can not keep a constant speed to improve the test results' accuracy. What’s more, you can load different weights on the pencil to do different standard tests.

The post Automatic Pencil Hardness Tester XB-OTS-CO103 appeared first on OTS TECHNIK.

]]>

Specification

  1. Pencil Load Range: 250g ~ 1000g
  2. Scratch stroke: 80mm
  3. Pencil scratch speed: 0~10 mm/s
  4. Machine size: 430*250*230mm

Features

  • The pencil scratch speed can be set, and the speed is constant and stable.
  • You can load different weights on a pencil: 7.5N、750g、500g、1000g, ect.
  • The special design of the fixtures makes the operation easier and more convenient.
  • There’s a load sensor inside the machine to check the pencil’s load; there’s no need to perform manual calibration.

The post Automatic Pencil Hardness Tester XB-OTS-CO103 appeared first on OTS TECHNIK.

]]>